- Suitable for all brands of intramedullary nail and kirschner wire operations
- Center hole diameter is 4.0mm for precise concentricity
- Features a drill chuck diameter of 0-8mm for versatility
- Offers an input voltage range of 110V-240V/50Hz
- Equipped with a battery capacity of 1800mA/h
- Customizable rated speed up to 1000rpm
- Provides a rating torque of 6.3Nm; sterilizable using HTHP at 134-138°C
Clinical overview
|
Diameter of drill chuck
|
0-8mm
|
|
Input voltage
|
110V-240V/50Hz
|
|
Output power
|
≤120W
|
|
Battery capacity
|
1800mA/h
|
|
Rated speed
|
0-1000rpm(customize avaliable)
|
|
Rating torque
|
6.3Nm
|
|
Charging voltage
|
7.2V
|
|
Sterilization
|
HTHP
|
|
Sterilizing temperature
|
134-138°C
|
|
Noise
|
≤60db
|
Available on request
The full spec + documentation pack for this device ships ahead of purchase on request. A sales engineer responds within one business day.
Configuration sheet
Sizes and dimensions, material and finish, compatible instruments and screw references, what ships in the set, lead time and warranty — all in one specification sheet, sent within one business day.
Documents & downloads
This device's IFU, CE Declaration of Conformity, ISO 13485 certificate and (where applicable) FDA 510(k) clearance ship with the order. Reach out below for the pack ahead of purchase.
Get in touch
Our clinical sales team will scope quantities, voltage, accessories and regulatory paperwork — usually within one business day.
The 601 has plenty of power for percutaneous work and the trigger gives fine speed control near vital structures. It is a little heavier than my cordless unit but the rigidity is welcome.
Dr. Louise Hammond, MD, FRCS (Orth)Verified buyerMay 7, 2025
Passing the drill over a guidewire is smooth and the cannulation stays concentric so the pilot hole follows my planned trajectory. Torque is ample for cannulated screw fixation of a femoral neck.
Dr. Alexander Petrov, MD, FAAOSVerified buyerSep 19, 2024
The cannulated shaft cleans out readily and the collet mechanism has stayed reliable across our inspection schedule. Sealing appears robust against irrigation ingress.
Callum Reyes, BMETJun 22, 2025
- Multifunctional power tool drill and saw set designed for precision and efficiency - Includes 4 batteries, 4 saw blades, 2 chargers, 2 sterile rings, and 1 chuck key - Output power of ≥120W for reliable performance - Bone saw frequency of 15000 oscillations per minute - Bone drill with a rated speed of 0-1200 RPM and torque of 0-13 N.m
- Suitable for all kinds of orthopedic trauma surgery - Mainly used in drilling hole for plates and screws during trauma surgery - Variable speed, low noise, high coaxiality, long service life - Features a drill chuck diameter of 0-4mm - Input voltage range of 110V-240V/50Hz - Output power of ≤120W and battery capacity of 1600mA/h
- Input voltage: 110V-240V/50Hz - Output power: ≤120W - Battery capacity: 1800mA/h - Rated speed: 800rpm - Charging voltage: 14.4V - Sterilization method: HTHP - Sterilizing temperature: 134-138°C
- Suitable for all kinds of facet joints operation - Rapid cutting with accurate positioning - Smooth and tidy cut with low temperature - Advanced saw blade lock and sheath device for safe operation - Multiple saw blade sizes available to meet clinical needs
- Suitable for various orthopaedic joint surgery - Rapid and accurate bone tissue cutting - Smooth and tidy bone edge - Low temperature rise during operation
- Suitable for various ankles' orthopaedic joint surgery - Rapid and accurate bone tissue cutting - Smooth and tidy bone edge after operation - Low temperature rise during operation
- Suitable for various orthopaedic joint surgeries - Rapid and precise bone tissue cutting - Smooth and tidy bone edge - Low temperature rise during operation
